Green Plug
Here at Green Plug we specialise in installing EV car chargers and our units cover all major brands. We are based in High Wycombe and cover all of Buckinghamshire and the surrounding county’s.
Green Plug was formed at the beginning of 2022 as part of PS GROUP, a well established Mechanical and electrical contractor with the mission to cover all of the surrounding county’s EV charging needs.
Home Installation
Discuss your EV charger installation with our team today for a free 100% no obligation free quote. With dedicated in house electricians we can have your charger installed in no time.
What’s Included
The fitting of the EV charger to a brick/rendered wall.
Up to 10 metres of 6mm power cable. This will be neatly clipped to the wall between the distribution board/electricity supply meter, and the charger.
Routing the cable through a drilled hole in a wall up to 500mm thick (if needed).
The fitting and testing of electrical connections and protections needed for the EV charger.
Up to 5 metres of white plastic covering for the interior wiring.
Installation by one of our expert engineers.
Installation compliance with the current British Standard Wiring Regulations (BS7671) and any associated documents/codes of practice, as well as the charger manufacturers’ instructions.
Commissioning and pairing with your smartphone – with full support from our engineer. You must be present with your smartphone at the time of commissioning.
A full demonstration of how your new charger works. Our engineer will be happy to answer any questions you have.
The existing electrical connections and protections within the property must be in an acceptable condition.
There must be no need for groundworks/civil works, electrical remedial works, or any other work.
If any extra work is needed, our engineer will let you know. In this case, you’d need to arrange any extra work at your own cost or another time for us to revisit.
Our engineer could do the following for an additional cost:
Put in a main isolation switch on installation day.
Carry out earth bonding upgrades.
Replace the main consumer unit / fuseboard.
Home Installation
Discuss your EV charger supply and installation with our team today for a 100% no obligation free quote . With dedicated installers ready on demand we can have your charger installed in no time.
What’s Included
The fitting of the EV charger to a brick/rendered wall.
Up to 10 metres of 6mm power cable. This will be neatly clipped to the wall between the distribution board/electricity supply meter, and the charger.
Routing the cable through a drilled hole in a wall up to 500mm thick (if needed).
The fitting and testing of electrical connections and protections needed for the EV charger.
Up to 5 metres of white plastic covering for the interior wiring.
Installation by one of our expert engineers.
Installation compliance with the current British Standard Wiring Regulations (BS7671) and any associated documents/codes of practice, as well as the charger manufacturers’ instructions.
Commissioning and pairing with your smartphone – with full support from our engineer. You must be present with your smartphone at the time of commissioning.
A full demonstration of how your new charger works. Our engineer will be happy to answer any questions you have.
The existing electrical connections and protections within the property must be in an acceptable condition.
There must be no need for groundworks/civil works, electrical remedial works, or any other work.
If any extra work is needed, our engineer will let you know. In this case, you’d need to arrange any extra work at your own cost or another time for us to revisit.
Our engineer could do the following for an additional cost:
Put in a main isolation switch on installation day.
Carry out earth bonding upgrades.
Replace the main consumer unit / fuseboard.
Green Plug
Here at Green Plug we specialise in installing EV car chargers and our units cover all major brands. We are based in High Wycombe and cover all of Buckinghamshire and the surrounding county’s.
Green Plug was formed at the beginning of 2022 as part of PS GROUP, a well established Mechanical and electrical contractor with the mission to cover all of the surrounding county’s EV charging needs.
How We Work
Book now Self service:
Quote Me:
What’s Included:
Recent Reviews
Discover what our customers have to say about their experiences with our EV charging installation services.
Recent Reviews
Key Features
kWh Metering
Analytics & Insights
Mobile App
Tarrif & Renewable Options
Select Your Charger
Rolec QUBEV Smart Charger –
From £845
Compatible With:
This intelligent, modern yet low-cost unit has been designed to provide electric vehicle drivers with an affordable home charging solution, without compromising on quality.
Paired with the QUBEV Smart app, you have full control of your charger. From scheduling your charging session for when your electricity is cheapest, solar matching ECO mode and much more. EV drivers can enjoy a seamless charging experience, ensuring their EV will be ready for their next electric adventure.
Universal charging socket
Power rating – Up to 7.4kW
Adjustable power rating – 10A, 13A, 16A & 32A
Free QUBEV Smart Wi-Fi app
Scheduled / off-peak charging
Solar compatible (single phase models only)
PME & residual current protection (AC 30mA Type A, DC 6mA)
Dynamic load balancing (CT clamp(s) & cable(s) included)
OCPP 1.6 compliant
Built-in LED charging status indicator
Meets UK Smart Charge Point Regulations inc. tamper security
Wi-Fi / Ethernet connectivity
IP54 & IK08 rated
Corrosion & fire resistant
CE and UKCA certified
Easy to install and maintain
Wall or post mounting options
3 year warranty
Compatible With:
Pulsar Max Wallbox EV charger –
From £895
Wallbox Pulsar was created to give your electric vehicle a powerful smart charger in an incredibly small size. It is perfect for daily use at home. Being both compact and having a minimalist design, it fits any garage. It is simple to use and is enhanced by multiple functions found on the myWallbox app. It’s available with a variety of charging cables and power supplies. Also able to connect to the myWallbox app and take advantage of a full range of smart charging functions
KEY FEATURES
· 5m tethered charging lead.
· Economy tariff sense input
· Compatible with all Type 2 electric cars.
· Built In Earthing BS 7671:2018 – 722.411.4.1(iv).
· Wifi and bluetooth connectivity
Additional Information
· Dimensions (H x W x D) 166mm x 163mm x 82mm
· EV Application: Domestic
· EV Tethered/Untethered: Tethered
· EV Fitting/Mounting: Wall-Mounted
Ohme ePod EV charger –
From £925
Compatible With:
The Ohme ePod is a compact EV charger designed for both Type 1 and Type 2 cables. It boasts dynamic charging technology and is fully compliant with UK charging regulations. Compatible with all energy tariffs, this charger comes with a standard installation. Users benefit from its smart app features, allowing scheduled charging, tariff integration, and energy usage monitoring.
Product Features
Charging rate: 7.4kW (32A, Single phase)
Connector type: Socket
Socket type: Type 2
In-built PEN fault device
Load management
Protection: RCD Type A with 6 mA DC
Overcurrent protection Not fitted, to be fitted separately
Connectivity: 3G/4G GSM (Sim card built-in)
Controlled via App or interactive buttons
CT Clamp Incl
Weather rating: IP54
Weight: 1.5kg
Colour: Black
Dimensions: H230xW140xD100mm
UKCA marked
Warranty: 3 Years
Easee one EV Charger – From £995
Compatible With:
The Easee car charger was specifically designed for the UK market. Its lightening intelligence gives you more power, smarter control and a higher level of security. Its inbuilt open PEN protection allows for a quick install with no need for additional earthing solutions.
KEY FEATURES
– Integrated open PEN conductor protection, i.e., no need for earth rod
– Reduced cost and time to install
– Fully dynamic charging power 1.4–7.4 kW
– Load balancing of up to 3 units per fuse by integrated wireless communication
– Automatic queuing system
-Offline proof load balancing
-Integrated eSIM in each box, lifetime free subscription
-Possibility of WiFi connection
– Permanent locking of the Type 2 cable
– Integrated earth fault protection (RCD)
– Integrated RFID reader (NFC / ISO 14443 and MIFARE Classic)
– Energy measurement (+/- 2 %), for reading charge consumption
– The box is 69 % smaller than other solutions and weighs only 1.5 kg
– 3 year warranty
– Universal, fits all types of electric cars and mains
– Full control with the Easee app or local WiFi interface, and open API
– Tethered or untethered, at the click of a button
Compatible With:
Ohme Home Pro EV charger –
From £995
The Ohme Home Pro is the perfect way to balance your home’s power usage and make EV charging easy and fast. With a large LCD screen for charge control, in-built earthing, and compatibility with all EVs, this product makes it simple to get the most out of your electric vehicle. The tethered cable makes it easy to use, while 3G/4G connectivity allows you to set up your Home Pro quickly and easily. 5m Cable attached Type 1 & 2 Also available in 8m please contact us for further details
Product features
7.4kW Smart EV Charger
Tethered with 5m Type 2 Charging Cable
Interactive LCD Screen
Live Charging Information Displayed On Screen
Set Charging Schedules & Target Battery Charge Percentage
Integrates with Your Energy Tariff to Charge at the Cheapest Times
Set Max Price Cap Per kWh to Keep Control of Costs
Green Score Feature Tracks CO2 Consumption
2G/3G/4G Connectivity for Use with App & Free Software Updates
Integrated PEN Protection System
Dynamic Load Balancing
RCD Type A with 6 mA DC
Voltage: 230V AC
Max Current: 32A
IP Rating: IP55
Operating Temperature -25°C to +45°C
Height: 170mm
Width: 200mm
Depth: 100mm
Weight: 4kg
Supplied Accessories: Backplate, Load Balancing Clamp, Wagos, Lightning Junction Box
Compliance: OZEV, EVHS & WCS Approved, UKCA Marked
Warranty: 3 Years
Compatible With:
MyEnergi Zappi Eco-Smart EV Charger – From £1,100
The ‘hubless’ charger, with smart tech integrated, in the form of WIFI and hardwired ethernet options.
Zappi has special eco charging modes which will benefit homeowners with grid-tied microgeneration systems, like wind or solar generation. Charging current is automatically and continually adjusted in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary electrical vehicle charging station.
KEY FEATURES
· 3 charging modes (Fast, Eco and Eco+)
· OLEV approved
· Optimises microgeneration self-consumption
· Works with solar PV or wind turbine systems
· Economy tariff sense input
· Charge and event logging
· Pin-code lock function
Additional Information
· Dimensions (H x W x D) 362mm x 220mm x 78mm
· EV Application: Domestic
· EV Tethered/Untethered: Tethered
· EV Fitting/Mounting: Wall-Mounted
Frequently Asked Questions
Are you new to electric vehicle charging and have some questions about the process and how it works? Please see below for our FAQ guide that answers the most common questions we are asked.
One of the most important benefits of utilizing our dedicated electric vehicle chargers is being able to make use of its fast charge software which in comparison to charging on a standard plug socket can be alot faster. This is due to limitations on standard sockets which restrict the power draw up to 3kW resulting in a much slower charge with a total time required of 13 hours to fully charge an average car battery.
With our state of the art technology we are able to provide chargers that can boost the charging speed of up to 633%.
Our most common products include:
7kW Charger – Used as standard for home EV chargers this product is capable of charging an average electric vehicle car battery within 4-5 hours.
22kW Charger – This product is a fast charger that requires a three phase electricity supply but is certainly something to consider if you own a high performance or larger battery electric vehicle.
The cost of charging your electric vehicle is much more convinient and cost effective in comparison to traditional petrol or diesel vehicles. For example, charging an electric Nissan with a 30kwH overnight to full charge would cost an estimated £3.60 with a range of 115 miles.
On average we complete any projects within 1-2 weeks from providing the quote to having the charger fully installed and functioning. Despite this we are always striving to meet all of our customers needs and be as flexible as we can; so if you require an urgent installation please contact our team and we will do our best to complete the installation within your set requirements.
Contact Us
Have any questions regarding an installation or want to get started? Click the button below and a member of our sales team will be in contact as soon as possible.